Quiet Dual Exhaust
Posted: Sat Dec 31, 2011 8:19 am
Here is my last project for the year. I added a set of Suzuki Hayabusa mufflers on the Tow'd and liked them so much I thought that the Burro would need the same. So here are the parts. Thanks again Scott for the headers, the mufflers came from ebay, and a standard 3 bolt flange. First, I cut off the old glasspack
Next I used an old head that was lying around and some wood blocks to to mock everything up
Then I tack welded the flange into place, and test fit it on the Burro
Once ever thing looks ok then it all comes apart for final welding. I still have to add a brace for the muffler, but that might have to wait till next year.
Now I have to clean up all the mess and tools
Next I used an old head that was lying around and some wood blocks to to mock everything up
Then I tack welded the flange into place, and test fit it on the Burro
Once ever thing looks ok then it all comes apart for final welding. I still have to add a brace for the muffler, but that might have to wait till next year.
Now I have to clean up all the mess and tools