Teak wood NOT boat non-slip for floor mats

Where did you get that part or get that work done? If you have a gadget or service to share, please do!
Post Reply
aburger01
Posts: 40
Joined: Tue Jun 30, 2015 12:08 pm

Teak wood NOT boat non-slip for floor mats

Post by aburger01 »

Image


Sent from my iPhone using Tapatalk
aburger01
Posts: 40
Joined: Tue Jun 30, 2015 12:08 pm

Re: Teak wood NOT boat non-slip for floor mats

Post by aburger01 »

$47 dollars for 8 foot by 3 foot roll , 6mm thick


Sent from my iPhone using Tapatalk
aburger01
Posts: 40
Joined: Tue Jun 30, 2015 12:08 pm

Re: Teak wood NOT boat non-slip for floor mats

Post by aburger01 »

3m stick backing


Sent from my iPhone using Tapatalk
User avatar
Willstang
Posts: 33
Joined: Tue Mar 10, 2015 5:13 pm
Location: Hemet/San Diego

Re: Teak wood NOT boat non-slip for floor mats

Post by Willstang »

Love the look!

Sent from my SM-G930P using Tapatalk
User avatar
rzeller
Posts: 734
Joined: Mon Apr 05, 2010 5:00 am
Location: Wilmington, NC

Re: Teak wood NOT boat non-slip for floor mats

Post by rzeller »

Brian,

It's very coincidental that you posted your flooring pictures now. I've been in the process of making my own duck boards for the buggy. When I traveled back from MOTF last year I drove through a lot of rain (and also on the ECV-Keys trip). Even though I have drain holes behind the seats, I still accumulate water on the floor boards and my feet get soaked. I decided I needed duck boards. Here is what I made. They are pretty simple and cheap. I have about $50 total in them. Oak slats from Lowes and some stainless screws. They are 16.5 inches wide with 5/8 inch spacer between each slat. I think they came out pretty cool. I'm guessing I'll get to try them out at this year's MOTB :evil:


4463

4464

4465

4467
Bud Zeller
Wilmington, NC
Manx Club Member Since 2004 - #2475
Member of the Manx Club's Long Haul League - 2015
2018 NORRA Mexican 1000 - #1356 - Bad News Racing
2022 NORRA Mexican 1000 - #3347 - Bad News Racing & ACME Companies
2023 NORRA Mexican 1000 - #1356 - Bad News Racing
'68 Meyers Manx - M1996F826S
'66 VW Kombi Bus
'73 VW Thing
hillmotorsports
Posts: 129
Joined: Tue Feb 24, 2015 6:07 pm

Re: Teak wood NOT boat non-slip for floor mats

Post by hillmotorsports »

The present weather suggests it might take more than your floor boards to keep your feet dry :shock:
Rosemarie and Paul Hill
Morrisburg, Ontario
Canada
613 330 4862
Member #4502
aburger01
Posts: 40
Joined: Tue Jun 30, 2015 12:08 pm

Re: Teak wood NOT boat non-slip for floor mats

Post by aburger01 »

I had the same wooden setup in a 73 Thing I had for years. I have a Sea Ray ski boat with these custom on the swim platform in the back but that custom wasn't cheap- I had been looking everywhere for the material then found it on eBay from China- not the exact same as on the boat but really close. And one tenth the cost from the boat- what I have noticed on my buggy is how quiet thus made the interior noise level- I really like your wood floors- they came out great!!! Takes me back to my Thing days [emoji3]


Sent from my iPad using Tapatalk
Post Reply