Page 1 of 1
Manxter Gas springs
Posted: Mon Mar 24, 2014 1:19 pm
by BobDi-ID-1109
Does anyone know what pound rate the gas springs for the manxter's hard top are rated at? I need to replace my old ones and they are not marked....Thanks
Re: Manxter Gas springs
Posted: Mon Mar 24, 2014 1:54 pm
by GotManx
I replace mine a couple of years ago. They are the 30# force, McMaster-Carr part number 9416K16.
http://www.mcmaster.com/#catalog/120/1220/=r8gmt4
Re: Manxter Gas springs
Posted: Mon Mar 24, 2014 3:14 pm
by DIESELDOOG
Bob,
Also check the edge of the connector on each end of your existing gas springs. Mine were cracked and broke off when I put the new springs in. It would have been much easier to have the new ones, instead of having to wait for another order to arrive.
Joe
Re: Manxter Gas springs
Posted: Mon Mar 24, 2014 5:28 pm
by dcamomanx
I was able to order a set through napa auto. They had their book all the ones available.
Doran
Re: Manxter Gas springs
Posted: Mon Mar 24, 2014 9:22 pm
by BobDi-ID-1109
Thank you everyone for the help, springs are ordered:)