Classic Manx to Monocoque project

How-to building, restoration, repairs, and fun with your authentic Manx!
Post Reply
parmaynu
Posts: 24
Joined: Fri Jan 10, 2014 6:00 am

Classic Manx to Monocoque project

Post by parmaynu »

I thought I would start a thread for my project so I can get more feedback and advise to help me finish. As Scott mentioned in his monocoque thread I am building a new variant on the Manx mono. My plan is to create a one piece buggy tub that fits directly over 
a shortened chassis spine. The though behind this is to add rigidity, reduce costs and to simplify buggy building. My starting point 
for the project is a direct copy of a classic siggy Manx. To further follow the monocoque theme I also have a Meyers opening hood. Image To make the floor panel I am using a Berrien panel 
 Image 
Unfortunately is is not just a case of bonding the two together and taking a mould. The naps hat, spine and rear cross member areas 
need to be widened to slip over the chassis spine. Here is my chassis. 
Image 
It is a '61 with the pans removed. I drilled the spot welds along the tunnel to separate the top and bottom plate. It was then shortened 
in a way so there is no visible signs of shortening on the bottom. I also removed the floorpan mounting flange from the rear of the spine 
where it splays out. This area is reinforced from the inside with steel plate. The reason for this is to allow more seating options. I also 
ran the brake line through the chassis to clean up the look. 
ImageImage 
So, in order make the Berrien floor fit over the chassis spine I decided to cut out the floor panels and construct a new tunnel, naps 
hat and rear cross member section. 
 ImageImageImage 
ImageImageImage 
Here is the floor panel buck as it sits today. Painted in Duratec surface primer. 
Image 
Now you are up to date I will list the jobs to complete Attach shell to floor
Fill and smooth all connecting areas
Paint and polish completed buck
Prepare buck for moulding process
Mould and release
Prepare mould, lay up new shell
Build buggy!

Additional plans for the shell are to add a return lip to the perimeter to clean up the finished shell and to create an under hood 
panel (similar to the Kick-Out) for wiring etc.

Time and money are holding me up at the moment but I am interested to hear what any of you guys think and any ideas that I 
could include as part of my final buck.

Last edited by parmaynu on Wed Mar 05, 2014 1:37 am, edited 1 time in total.
parmaynu
Posts: 24
Joined: Fri Jan 10, 2014 6:00 am

Classic Manx to Monocoque project

Post by parmaynu »

Not sure why the text has gone like that. Hope you can follow it!
DIESELDOOG
Posts: 265
Joined: Thu Feb 24, 2011 6:00 am
Location: Northern Illinois

Classic Manx to Monocoque project

Post by DIESELDOOG »

Patmaynu:  I cleaned your formatting up a bit.  Hope it helps

Quick question:  Are you using copper for the brake lines?


Joe

Last edited by DIESELDOOG on Wed Mar 05, 2014 1:43 am, edited 1 time in total.
FulsGld
Posts: 276
Joined: Wed Mar 10, 2010 6:00 am
Location: Pacific NorthWest

Classic Manx to Monocoque project

Post by FulsGld »

Very nice project. Going to be fun following this thread.
Gary Berry
Prosser, WA
1971 Turista
1969 ManxVair
Member #1112
parmaynu
Posts: 24
Joined: Fri Jan 10, 2014 6:00 am

Classic Manx to Monocoque project

Post by parmaynu »

Thanks for that Joe.

I used Knufier for the brake lines.
User avatar
Mike-Presley
Posts: 107
Joined: Mon Dec 27, 2010 6:00 am
Location: Barstow, Calif.

Classic Manx to Monocoque project

Post by Mike-Presley »

Wow, quite a project. What's knufier? I looked but couldn't find anything.
manxdavid
Posts: 998
Joined: Fri Mar 26, 2010 5:00 am
Location: Bull Bay, Anglesey, North Wales, UK. Manxclub #678

Classic Manx to Monocoque project

Post by manxdavid »

sandwinder wrote:Wow, quite a project. What's knufier? I looked but couldn't find anything.
It's 90% copper and 10% nickel, really common in Europe at least for brake lines etc. Maybe it's just called something else in the US? Probably just copper nickel.
"Wise men talk because they have something to say, fools because they have to say something." (Plato)
parmaynu
Posts: 24
Joined: Fri Jan 10, 2014 6:00 am

Classic Manx to Monocoque project

Post by parmaynu »

It's my poor spelling I think!

http://www.machine7.com/section.php?xSec=2686
User avatar
Mike-Presley
Posts: 107
Joined: Mon Dec 27, 2010 6:00 am
Location: Barstow, Calif.

Classic Manx to Monocoque project

Post by Mike-Presley »

Kunifer, I found it. Sounds like a good product. It seems to be illegal in the U.S. That's probably because we seem to believe that if it wasn't invented here then it can't possibly be as good as ours.
ManxManiac
Posts: 200
Joined: Tue Mar 30, 2010 5:00 am
Location: Ventura, CA

Classic Manx to Monocoque project

Post by ManxManiac »

KUNIFER... sounds a lot like "BUNDY-FLEX". Bundy-Flex (a brand name) is usually sold in a coil & it is basically, nickel over copper! Very soft & pliable, yet is strong enough for brakeline pressures, it's easy to bend & form & it is a bit easier to single-flare & double-flare, also to make the European style bubble-flare. Years ago when I sold hydraulic supplies, it was a real big seller.

Michael Cates
ManxManiac
#958
Ventura, CA
Original Meyers Manx "Xena"
M1609C8S22
Post Reply